Gelwhite-H XR

원료 설명

High-purity rheology additive based on carefully selected natural bentonite, for use in personal care applications as a thixotropic gelling agent in aqueous systems with excellent anti-settling and stabilizing properties (NATRUE Approved). Gamma irradiation sterilized version of GELWHITE-H. [Product family] GELWHITE is BYK´s brand for highly purified montmorillonites for viscosity control. GELWHITE-H XR is a highly purified bentonite obtained from selectively mined, extremely pure mineral deposits by means of a unique process providing unequalled high purity, whiteness, and brightness. The additive is purely inorganic and stable against diluted acids and bases. It is highly compatible with anionic and nonionic surfactants and can be used to thicken and stabilize oil-in-water emulsions. Gels produced with GELWHITE-H XR are resistant to oxidation and microbial degradation. Technical data sheet 적용: Creams and lotions, Sunscreen products, Antiperspirants/deos, Facial masks, Bath and shower gels, Liquid makeup, Blush, Eye makeup, Hair care products, Hair styling products, especially recommended recommended, Recommended levels, 1-10 % additive (as supplied) based on the total formulation, depending on the application., The above recommended levels can be used for orientation. The optimum dosage should be determined by, application-related test series., Incorporation and processing instructions, GELWHITE-H XR is hydrophilic and can be easily wetted by water. For maximum efficiency, complete, dispersion of the material is required. Warm water can be used to facilitate the dispersion. The additive is, added as a powder to pure water while stirring slowly. The stirring speed is then increased (800–3000 rpm), and the powder is dispersed for 15 minutes. GELWHITE-H XR should be completely hydrated (recommended, hydration time: 10 minutes) before all other components of the formulation are added to the dispersion. The, additive can also be used as a prepared pre-gel (with 5–10% GELWHITE-H XR). To avoid post-thickening, effects, this pre-gel should be allowed to age overnight. It is then slowly added to the water phase of the, formulation while stirring at low speed., Your local ANTI-TERRA®, AQUACER®, AQUAMAT®, AQUATIX®, BENTOLITE®, BYK®, BYK-AQUAGEL®, BYK®-DYNWET®, BYK-MAX®, BYK®-SILCLEAN®,, contact BYKANOL®, BYKCARE®, BYKETOL®, BYKJET®, BYKONITE®, BYKOPLAST®, BYKUMEN®, CARBOBYK®, CERACOL®, CERAFAK®, CERAFLOUR®,, CERAMAT®, CERATIX®, CLAYTONE®, CLOISITE®, DISPERBYK®, DISPERPLAST®, FULACOLOR®, FULCAT®, GARAMITE®, GELWHITE®, HORDAMER®,, BYK-Chemie GmbH LACTIMON®, LAPONITE®, NANOBYK®, OPTIBENT®, OPTIGEL®, PURABYK®, RECYCLOBYK®, RHEOBYK®, SCONA®, SILBYK®, TIXOGEL® and, VISCOBYK® are registered trademarks of the BYK group., Abelstraße 45, 46483 Wesel The information contained herein is based on our current knowledge and experience. No warranties, guarantees and/or assurances of any kind, either, Germany express or implied, including warranties of merchantability or fitness for a particular purpose, are made regarding any products mentioned herein and data, or information set forth, or that such products, data or information may be used without infringing intellectual property rights of third parties. Any, Tel +49 281 670-0 information about suitability, use or application of the products is non-binding and does not constitute a commitment regarding the products’ properties,, use or application. Contractual terms and conditions, in particular agreed product specifications, always take precedence. We recommend that you test, info@byk.com our products in preliminary trials to determine their suitability for your intended purpose prior to use. We reserve the right to make any changes and to, update the information herein without notice., 2 www.byk.com [Incorporation] GELWHITE-H XR is hydrophilic and can be easily wetted by water. For maximum efficiency, complete dispersion of the material is required. Warm water can be used to facilitate the dispersion. The additive is added as a powder to pure water while stirring slowly. The stirring speed is then increased (800–3000 rpm) and the powder is dispersed for 15 minutes. GELWHITE-H XR should be completely hydrated (recommended hydration time: 10 minutes) before all other components of the formulation are added to the dispersion. The additive can also be used as a prepared pre-gel (with 5–10% GELWHITE-H XR). To avoid post-thickening effects, this pre-gel should be allowed to age overnight. It is then slowly added to the water phase of the formulation while stirring at low speed.

원료 정보

상품명

Gelwhite-H XR

복합물상품명

미확인

공급사

1곳

제조사

BYK

종류

Thickeners, Structuring Agents/Butters/Waxes

용도

Formulation Stability, Texture Enhancement

인증·등록

NMPA, REACH

구성 성분 (1)

공급사 (1)

규격 및 사용 정보

INCI

Bentonite or Montmorillonite

CAS 번호

미확인

EC 번호

미확인

원산지

미확인

성상

white powder

용해성

미확인

pH

미확인

권장 사용량

1-10 % additive (as supplied) based on the total formulation, depending on the application.

보관 조건

미확인

사용 기한

미확인

포장 단위

미확인

기술 문서 (TDS·SDS·COA)

TDS

안전성 자료

미확인

규제 자료

Vegan

Color

white

Swelling

min. 24 ml

Brightness

min. 77

Composition

Highly purified phyllosilicate

Bulk density

290-434 kg/m³

Lead content

< 40 mg/kg

Delivery form

powder

Product group

Rheology Additives

Water content

5-8 %

Arsenic content

< 5 mg/kg

Total viable count

< 100 cfu/g

pH value (2 % in water)

9.5-10.5

Shelf life (months, unopened)

36

Sieve residue (200 Mesh/74 µm)

0.0 %